| Matérial | Printability | Temperature resistance | Impact resistance | Density |
|---|---|---|---|---|
| PLA | 9/10 | 50 °C | 65 Mpa | 1.24 g/cm³ |
| PETG | 8/10 | 70 °C | 53 Mpa | 1.23 g/cm³ |
| ABS | 9/10 | 100 °C | 40 Mpa | 1.04 g/cm³ |
| TPU | 6/10 | 65 °C | 25 - 40 Mpa | 1.20 g/cm³ |
Printopal
Design & 3D printing center